GT Power - fifth-generation portable power station

The GTi20000G5 is GT Power's fifth-generation portable power station: a 2,304Wh NCA lithium battery behind a 3,600W pure sine wave inverter, in a 24kg welded steel frame. It runs 230V gear with no fuel, no exhaust and under 30dB of noise, so it can work where a petrol generator can't.

• 2,304Wh capacity — runtime is capacity divided by load. That's a little over an hour at 2,000W, or about 38 minutes at the full 3,600W, less some conversion loss.
• 3,600W continuous, pure sine wave — 230V 50Hz output from 2 AC outlets, safe for battery chargers, laptops and inverter-driven tools.
• Overload headroom for motor starts — holds 4,000–5,400W for over 500 seconds, up to 7,200W for over 50 seconds and up to 9,000W for over 10 seconds, with a 20kVA instantaneous peak. That's what lets it start compressors and other motors that briefly draw several times their running power.
• Welding capable — GT Power reports independent testing at 100A continuous arc for 30 minutes, equivalent to 25 x 2.5mm general-purpose electrodes.
• Recharges in about 2.2 hours — from AC mains.
• Battery protection — the management system guards against over-temperature, over-current, short circuit and over-voltage.
• Monitoring — 10-level battery indicator and LCD status display on the unit, plus live battery level and runtime on your phone through the GT Power Connect app.
• Built for site use — welded steel frame, IP54 rated, 24kg, 526 x 485 x 211mm.
• Compliance — UN38.3 tested for lithium battery transport and RCM marked for NZ and Australia.
• Warranty — 2 years commercial, 4 years domestic.

Included: GTi20000G5 power station, AC charging cable, user manual.

Optional: 16895 heavy duty 15m 28A extension lead.

Built for sites, sheds, vehicles and indoor jobs where a generator is too loud, too fumy or not allowed. If you want to check whether it'll run your specific gear, bring us the wattages and we'll work through the runtime with you.