King Tony 100mm Air Blow Gun (BSPT Air Inlet)

The short-nozzle blow gun for the bench and the machine: clearing swarf off a drill press table, drying parts after washing, blowing dust out of a filter or a housing before it goes back together. The 100mm steel nozzle keeps the air where you point it. The nylon fibre handle stays comfortable in the hand through a long clean-up.

It fits a 1/4" BSPT air line. It runs at a recommended 90 psi, with a working range of 75 to 120 psi. Air consumption depends on your hose size, so check your compressor can keep up on a 3/8" line. It runs at 85 to 90 dB, so wear hearing protection for long sessions. If you need to reach into an engine bay or the back of a machine, the 330mm version (79900-13) is the one.

• Model 79900-04
• Nozzle: 100mm, steel
• Handle: nylon fibre
• Air inlet: 1/4" BSPT
• Recommended air pressure: 90 psi
• Working pressure: 75-120 psi (5.3-8.4 kgf/cm²); maximum 220 psi
• Air consumption: 13 cfm (350 l/min) on 1/4" hose; 15 cfm (430 l/min) on 3/8" hose
• Sound pressure: 85-90 dB